Product Details
Brass Green Type I (QCC) Connector (1-5/16" Female ACME to 1/4" Male NPT) by Marshall®. Quantity: 1 Piece. The Type I (QCC) connectors are designed with a built-in excess fl ow feature and a positive shutoff that will not allow gas to flow until the connector is fully engaged. In case of a fire the built-in thermal protection on the QCC connector melts allowing the nipple to disengage from the tank connection and stop the fl ow of propane. These QCC connectors also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into the atmosphere.
Notes
- The Type I (QCC) thread replaces the POL connection on 40 pound or less DOT propane cylinders
- To connect a Type I (QCC) connector to a cylinder, close the cylinder valve and the control valves to all connected appliances. Hand tighten the QCC onto the cylinder and slowly open the cylinder valve. If the valve is opened too quickly, the excess flow device will be activated closing the flow of propane to the appliance. If the excess flow device is activated, close appliance control valves and wait 60 seconds to allow pressure in the line to equalize. Additional equalization time may be needed depending on the length of the hose. Turn on appliances by following the manufacturer’s suggested lighting procedures
- An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system
Specifications
| Inlet Size: 1-5/16" |
| Inlet Type: Female ACME |
| Outlet Type: Male NPT |
| Outlet Size: 1/4" |
| Material: Brass |
| Outlet Size2: 1/4" |
| Type: QCC/ OPD |
| With Shut Off: Yes |
Features
- Made to deliver a flawless fit, quality, and lasting life
- Designed and tested to meet or exceed the industry standards
- Made from superior materials to provide a durable construction
- Manufactured using cutting-edge technologies for accuracy and precision
- Offered at an attractive price
For over 42 years Marshall Excelsior® has been a progressive manufacturer of top quality and competitively priced LPG & NH3 equipment that is leading the industry in innovation and low emission products. Manufacturer offer a full range of products that support the LPG & NH3 Bulk Plant, Transport, Delivery/Dispensing, and Domestic applications.