Product Details
Battery Isolator Relay Delay by Intellitec®. Unlike diode isolators, this system provides an engine driven alternator with the opportunity to begin charging the main battery before connecting the auxiliary battery. This allows the use of self-exciting alternators and lets the engine briefly warm up prior to placing the load of a heavily discharged auxiliary battery on the alternator.
Notes
- Used For: delays the function of the isolator relay when the Coach is started
- Solenoid sold separately
Specifications
| Voltage: 12 V |
Features
- Bi-Directional Isolator Relay Delay Offers A New Approach To Charging Batteries In An RV Application
- Provides An Engine Driven Alternator With The Opportunity To Begin Charging The Main Battery Before Connecting The Auxiliary Battery
- Allows The Use Of Self-Exciting Alternators And Lets The Engine Briefly Warm Up Prior To Placing The Load Of A Heavily Discharged Auxiliary Battery On The Alternator
- Fully Encapsulated In A Plastic Enclosure For Mounting In The Engine Compartment With Two Screws
- Operates In Combination With A Conventional Continuous Duty Cycle Isolator Relay That Has Been Used By A Number Of Vehicle Manufacturers
The unit is fully encapsulated in a plastic enclosure for mounting in the engine compartment with two screws. It operates in combination with a conventional continuous duty cycle isolator relay that has been used by a number of vehicle manufacturers.There are three (3) wires to connect to the delay unit: one from an ignition switched 12V source, a ground and the isolator relay coil. It operates by sensing the voltage on the main 12V system. When this voltage goes above 13.3V for approximately 12 2nd, as happens when the engine is running normally (normal alternator output voltage is approximately 14.4V), it will close the isolator relay providing charging current to the auxiliary battery. When the ignition switch is turned off, the relay will open immediately.
Founded in 1994, Intellitec® has evolved from a small supplier of battery protection equipment to an internationally renowned manufacturer of electronic systems and other related products intended to solve your power problems. Intellitec’s product line consists of over 10,000 systems and parts used for power distribution, charging, switching, and controlling electrical systems in a wide variety of applications, including bus, truck, emergency service, leisure vehicles, and marine. Everything from batteries, battery chargers, monitors, and guards to inverters, isolation transformers, solar products, and much more, the company has the solution that meets your individual needs. Intellitec is proud to be ISO 9001 & 14001-2015 certified by ISOQAR and UKAS, and also holds accreditation by Vehicle Certification Agency for Conformity of Product (COP).